Campbell AVW200 series Instruction Manual download pdf (Page 25)

Select “ComPort” under the “Network Map”, select the communications port to connect

to the Datalogger in “ComPort Connection”.

CONDITIONAL NOTE: IT MAY BE NECESSARY TO PRESS “COMMUNICATIONS ENABLED ” TO

OPEN THE COMMUNICATIONS PORT.

COM NUMBERS VARY WITH COMPUTER , USB DEVICES AND SERIAL ADAPTERS.

REFER TO THE COMPUTER DEVICE MANAGER IF UNSURE OF WHICH COM NUMBER

TO USE.

Select “PakBusPort” under the “Network Map”, in “Maximum Baud Rate” for direct

connection to the Datalogger select “115200”.

WHEN FINISHED, PRESS THE “APPLY” BUTTON AT THE BOTTOM LEFT OF THE SETUP

SCREEN TO SAVE ALL SETTINGS.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 46 47

No comments

Campbell AVW200 series Instruction Manual Page 25