Campbell CVF4 Specifications download pdf (Page 54)

Appendix B. CNF4 Heater/Ventilator

B-12

pulling it straight out. Inspect the fan inside for any object that might impede

the fan’s rotation. Upon completing the inspection, put the filter and the cover

back in place.

B.5.3 Replacing the Filter for the Ventilator

The filter needs to be checked for every 6 to 12 months. Remove the black

cover at the bottom side of the ventilator by prying it open with a small flat-

head screw driver or by pulling it straight out. Inspect the filter for dust and

particles that might impede the air flow into the ventilator. The filter can be

cleaned with warm clean water, or can be replaced with the new one. You can

purchase the replacement filters from Campbell Scientific (CSI p/n 26010, a set

of 5).

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 60

No comments

Campbell CVF4 Specifications Page 54