Campbell RTMS SYSTEMS Instruction Manual download pdf (Page 5)

SECTION 1. GENERAL RADIOTELEMETRY NETWORK

1-2

1.2 FIELD STATION

Purpose: The field station is where the

measurements are made. The

Campbell Scientific datalogger

resides at this station taking the

desired measurements. Any field

station can also operate as a

repeater. The only requirement is

that the station’s antenna must be

able to communicate in all desired

directions. This may require an

omnidirectional antenna.

Equipment Required:

• Radio

• RF Modem

• Antenna and antenna cable

• Datalogger

• Power supply, enclosure, sensors, and

mounting needs

FIGURE 1-2. CR10 Field Station

1 2 3 4 5 6 7 8 9 10 ... 33 34

Comments to this Manuals

No comments