Software Packages
Campbell Scientific software supports datalogger programming, communications between the datalogger and PC, and
data display. Brief descriptions follow; for more information, see our literature or Web site.
Starter Software
Our Starter Software can be downloaded at no charge from
www.campbellsci.com/resource.html. Our Resource CD also
provides this software as well as PDF versions of our literature
and manuals.
SCWin Program Builder creates datalogger programs requiring
only sensor measurement and data output. It supports 120 sen-
sors and multiplexers.
PC200W Starter Software allows you to transfer a program to,
or retrieve data from, a CR10X via a direct communications link.
Datalogger Support Software
The LoggerNet 2.X-series is our full-featured software package
that supports:
• direct connection and telecommunications links
• combinations of communication options (e.g., phone-to-RF)
• manual and scheduled data collection
• programming for most commercially available sensors as
well as devices such as SDMs, multiplexers, and relays
• storage module communication
• multitab data displays that can include alarms, sliders,
graphs, toggles, tables and/or gauges
Campbell Scientific offers several programs that are intended to
be used with our LoggerNet software. All of these programs
require a licensed copy of LoggerNet running on a PC. The pro-
grams are:
• Baler stores LoggerNet data into new files so that the
data can be imported to a data base or third-party analysis
program
• RTMC Web Server converts real-time data displays into
HTML files
• RTMCRT allows remote PCs to display and print
real-time data
• LoggerNetData allows users at remote PCs to post-process
LoggerNet data, generate reports, and display LoggerNet
data
• CSI OPC server allows third-party OPC compatible
graphic packages to view our datalogger data
• LoggerNet-SDK allows software developers to create and
freely distribute custom applications that communicate
with our dataloggers
Real-Time Data Monitor (RTDM)
RTDM allows experienced users to create custom graphic
screens. RTDM supports automatic generation of JPEG output
for Internet display. Developer and display-only versions are
also available.
RTDM is powerful, versatile software that can display
real-time or archived data in bar, lines, area, or point charts.
Automatic generation of JPEG outputs facilitates displaying
information on Internet pages.
7
Systems that include high
current drain peripherals
such as satellite transmit-
ters or are located where
it’s inconvenient to
replace batteries might
require batteries with
larger Ahr capacities
than our PS100 or
BPALK. Campbell
Scientific offers the BP12
and BP24 battery packs
for these systems.
Power Supplies
Any 12 Vdc source can power the CR10X; a PS100 or BPALK is
typically used. The PS100 includes one 7 Ahr rechargeable bat-
tery, charged with ac power (requires the optional wall charger)
or a solar panel. The BPALK consists of eight non-rechargeable
D-cell alkaline batteries with a 7.5 Ahr rating at 20°C. An exter-
nal AA-cell pack that supplies power while the D-cells are
replaced is included.
The BP12 and BP24 battery packs are also available. The BP12
and BP24 have nominal ratings of 12 and 24 Ahrs, respectively.
The batteries should be connected to a charging regulator and a
charging source. For information about analyzing your sys-
tem’s power requirements, see our Power Supply product litera-
ture or Application Note 5-F. Both can be obtained from www.
campbellsci.com
(24 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals