Campbell CR800 Specifications download pdf (Page 30)

CR800 and CR850 Overview

OV4.3 Setting the CR800 PakBus Address

The CR800 default PakBus address is 1 (Section OV2.5). Unless the CR800 is

used in a network, there is no need to change the Pakbus address, or any of the

other default settings. To change settings, the Device Configuration Utility

(DevConfig) is used, as described in Section 0V3.

OV4.4 PC200W Software

This Quick-Start tutorial prompts the user through the process of programming

the CR800, monitoring sensor measurements, collecting data, and viewing data

using the PC200W software.

When PC200W is first started, the EZSetup Wizard is launched. Click the

Next button and follow the prompts to select the CR800, the COM port on the

computer that will be used for communications, 115200 baud, and Pakbus

Address 1. When prompted with the option to Test Communications click

the Finish button.

To change a setting in the datalogger setup, select that datalogger from the

main window, and click the Edit button. If a datalogger was not added with

the Wizard, click the Add button to invoke the Wizard.

After exiting the EZSetup wizard, the Setup/Connect window appears, as

shown below. The Current Datalogger Profile, Datalogger Clock, and

Datalogger Program features of PC200W are integrated into this window.

Tabs to the right are used to select the Monitor Values and Collect Data

windows. Buttons to the right of the tabs are used to run the Split, View, and

Short Cut applications.

Short Cut

OV-22

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 323 324

No comments

Campbell CR800 Specifications Page 30